EQUIPMENT FOR SALE

Everything is sold as is. Buyer is responsible for pick up, shipping and rigging (if applicable).

Payments can be made via ACH, wire, or credit card.

If interested in any of the listings, please email Joel@TexBev.com.

Lots are deleted from this page as they are sold.

CLICK HERE FOR PICTURES OF ALL AVAILABLE LOTS.

Lot 5: DE Filter - Criveller / Alpha Filters

Asking Price: $5,000
Approximate Dimensions: 3’ x 5’ x 8’
Location: Arlington, TX
Additional info: This filter was acquired by TexBev, but never used. The condition is unknown.

Lot 11: ElectricBrewing Supply PID Control Panel

Asking Price: $750
Location: Arlington, TX
Additional Info: Condition is unknown.
Similar unit: https://ebrewsupply.com/products/50a-pid-control-panel-4-elements?variant=48557378255

Lot 12: DE Filter

Asking Price: $7,000
Location: Fort Worth, TX
Additional Info: Works well. We have kept it as a back up to our centrifuge, but haven’t really needed it.

Lot 14: Fruit Presses

Asking Price: $1,500
Location: Dallas, TX
Additional info: The purchase is for the entire lot of all 5 presses. It is possible that some pieces are missing, so it is priced accordingly.
This is a link to the largest press: https://bit.ly/3RXYy03

Lot 17: Extraction Tanks, Vacuum Concentrator, and Working Platform / Catwalk

Asking Price: $25,000
Extraction Tank Model, Weight, and Volume: Chinz TQ-1.0, 1965 lbs, 1000 liters
Extraction Tank Approximate Dimensions: 70” wide x 128” tall
Vacuum Concentrator Model, Volume, and Dimensions: QN-0.5, 500L, 10’ 8” tall and 52” in diameter
Working Platform Dimensions: 12,000 L x 3,000 W x 3,000 H (mm) | In feet, that is approximately 40ft L x 10ft W x 10ft H
Location: Dallas, TX
Additional info: There are three extraction tanks and one vacuum concentrator. The tanks are steam-jacketed, equipped with agitators, fully-dumping, and have never been used. We purchased the tanks from a company that was planning to do CBD and essential oil extraction. From our understanding, the tanks can be used for coffee and tea too. The platform has also never been assembled and it includes the columns, stairs, and railing. As you can see from the example picture, the extraction tanks sit in the platform and can be fully-dumped underneath.

Lot 19: Stainless Equipment Stand

Asking Price: $300
Quantity Available: 2
Approximate Dimensions: 48” x 70” x 136”
Location: Dallas, TX
Additional info: These were purchased as part of a larger asset acquisition, so little information is known about the stands. We were told that they are stainless steel, but we do not know what they were designed to hold.

Lot 21: Heat Exchanger

Asking Price: $3,500 (It was $5,995 New)
Location: Dallas, TX
Additional info: It is a 2 stage 9.0 square meter heat exchanger. It was purchased new in September 2021, but the project was cancelled. We were hoping to use it for inline chilling during wine transfers, but our glycol chiller didn’t have the capacity to handle it. The heat exchanger performed perfectly, but our chiller tonnage was the problem.
Purchased from GW Kent: https://www.gwkent.com/2stg-exchanger-9-sq-meter-1-2.html

Lot 25: Water Treatment Package

Asking Price: $6,500
Approximate Height: 7’
Approximate Length and Width: 4’ x 5’
Location: Arlington, TX
Additional info: All three vessels pictured are included.

Lot 27: Apex Conical Fermenter

Asking Price: $7,500
Approximate Height: 10 feet
Approximate Diameter: 54 inches
Location: Arlington, TX
Additional info: Note the missing feet. Estimated at 15 bbl working volume, but unknown.

Lot 28: Chico Creek 20 BBL Brite Beer Tank

Asking Price: $11,500
Approximate Dimensions: 9’ tall and 66 inches in diameter
Location: Fort Worth, TX
Volume: 20 BBL (total capacity is 24.87 BBL)
MOP: 30 PSI

Lot 33: SVEN Mill

Asking Price: $500
Location: Arlington, TX
Additional Info: The condition is unknown. The motor is 3 Hp.

Lot 34: Used Georg Fischer Cool-Fit ABS Glycol Piping

Asking Price: $5,000
Location: Fort Worth, TX
Additional Info: All piping and fittings pictured are included. The majority is 3” and 4”.

Lot 35: Closed Top Wine Fermenters

Asking Price: $9,000 each
Quantity: 10
Location: Dallas, TX
Make and Model: Letina Z8100-C
Additional Info: The tanks are 8100 liters (2146 gallons), closed top, include the standard fittings and spray ball, and have 6.0 square meter glycol jackets.
Dimensions: Spec sheet is included with the photos.

Lot 41: 30 BBL Conical FV

Asking Price: $14,000
Quantity: 2
Location: Fort Worth, TX
Additional Info: They are in perfect condition, but we have outgrown them. Purchased new in 2016. Manufactured by SK Manufacturing and they have a working volume of 30 BBL, total volume is approximately 37.4 BBL.

Lot 42: 48” Round Accumulation Table

Asking Price: $2,000
Location: Fort Worth, TX
Additional Info: Works well. Comes with VFD to regulate speed.
Dimensions: 48” Round

Lot 44: Apex 30 BBL Tank #1

Asking Price: $7,500
Location: Dallas, TX
Additional Info: This tank was purchased new in May 2019. It works as designed. Total volume is 4,000 liters (1,000 gallons).

Lot 45: Apex 30 BBL Tank #2

Asking Price: $8,000
Location: Dallas, TX
Additional Info: This tank has worked as designed. No issues. ABE WatchDog is not included with the sale. Total volume is 3,700 liters (925 gallons). No carb stone included, but all other standard fittings will be provided with the sale.

Lot 46: ABE 30 BBL Brite Tank (BBT)

Asking Price: $11,000
Location: Dallas, TX
Additional Info: Manufactured by ABE (American Beer Equipment). This tank has worked as designed. No issues. ABE WatchDog is not included with the sale. Total volume is 1147 gallons.